Hydropower is all set to continue its resurgence given the trends in investment across the world.

by David Appleyard

LONDON — For decades large-scale hydropower developments have been viewed as something of a pariah within the renewable energy sector. Indeed, despite an acknowledged contribution to sustainable energy development — hydropower’s global kWh contribution dwarfs all other renewable technologies — it has largely been excluded from considerations that benefit other forms of renewable power generation and has weathered widespread criticism over projects deemed unsustainable.

All that is changing though, and today the prospects for large-scale hydropower development look better than they have for decades. According to the latest figures available from the International Hydropower Association (IHA), some 30 GW of new hydropower capacity were commissioned in 2012, including about 2 GW of pumped storage. Naturally this scale of development has been accompanied with significant investment in all regions, notably South America, Asia and Africa.

On the back of these figures the IHA identifies three clear trends that are expected to see both investment and development growth for the hydropower sector in the coming years.

Top of the list is the continued drive for regional development where the increasing demand for secure supplies of both power and water places hydropower in the sweet spot for international collaboration designed to manage water and develop power systems across national boundaries. As a result, hydropower is both supporting and benefiting from a general trend of building transmission lines between countries and the pooling of power across borders.

An example comes from Central America and its Electrical Interconnection System (SIEPAC) project connecting the countries of Guatemala, El Salvador, Honduras, Costa Rica, Nicaragua and Panama with an 1800-km transmission line. The region has significant hydropower potential but large scale investment and development has been hampered by the small size of the individual local markets. With an investment of US$405 million, funded primarily by loans from the Inter-American Development Bank, the Central American Bank for Economic Integration and Corporación Andina de Fomento, the SIEPAC development opens up opportunities to trade both regionally and into the large markets of neighbouring Columbia and Mexico.

The 300-MW interconnector was fully commissioned mid-2013 and has accompanied a wave of hydropower development. For instance statistics provided by Panama’s Empresa de Transmision Electrica S.A. show the country’s installed hydro capacity grew by more than 13 percent in 2012, some 282 MW of additional power. The increase, in the context of Panama’s 2.43 GW of total installed capacity, is attributed to a number of new run-of-river hydropower projects that came online or received upgrades.

Included in that figure are the 5.35-MW El Fraile, 25.8-MW Gualaca, 33.8-MW Lorena, 56.8-MW Bajo de Mina, 88.2-MW Baitun, 13.1-MW Hidropiedra and 58.7-MW Prudencia projects.

Another regional example, though on a significantly larger scale, comes from the 2375-km Rio Madeira transmission project in Brazil. Claimed as the longest power transmission lines in the world, it is connecting 6,450 MW of hydropower projects in Porto Velho region of the Amazon — the Santo Antônio and Jirau Dams on the Madeira River — to the large heavily populated cities of the south. Due for final completion this year, this 7,100-MW, 600 kV HVDC line began commercial operations in the middle of 2013 and in the December, Alstom won a contract to supply additional generation equipment to Santo Antonio, bringing the entire plant to 3,568 MW. This new part of the project will be concluded in December 2016, Alstom says.

The Rio Madeira transmission project is the longest power transmission line in the world.  Credit: ABB.

New Investment in Hydro

A second key trend identified by the IHA is the increasingly global nature of hydropower investment. Examples come from South Korea’s investment in Pakistan.

In 2012, according to Pakistan’s Board of Investment, the 147-MW run-of-river Patrnid Hydropower Project was set as an Independent Power Producer (IPP) development. Backed by Korea’s K-Water and Star Hydro Power Limited (SHPL), 25 percent of the US $400 million cost of the development on the river Kunhar will come from them, while 75 percent will be financed by banks, including Export Import Bank of Korea, Asian Development Bank, International Finance Corporation and Islamic Development Bank.

Following this deal a consortium of Korean companies — again including K-Water but this time with Korean Midland Power and Posco Engineering and Construction — signed memorandums of understanding for US $3 billion worth of deals for two hydropower plants on the Indus in the Kohistan-Khyber Pakhtunkhwa district of Pakistan: the 665-MW Lower Pallas Valley and the 496-MW Spat Gah plants.

Africa is also benefitting from this type of trans-national infrastructure investment. In the country’s largest private sector investment to date, 2012 saw the commissioning of Uganda’s 250-MW Bujagali hydro station, which meant electricity production exceeded demand for the first time.

Subsequently, in mid-2013, the country signed a deal with China’s Sino-Hydro Group Ltd for the construction of the $1.65 billion Karuna hydropower project on the White Nile. This 600-MW installation is backed by Chinese credit worth a reported 15 percent of the total cost.

In September 2013 Uganda’s President, Yoweri Museveni, launched construction of Karuma, which is due for completion in 2018.

The U.S. is also reportedly getting in on the action, considering financing some of the Democratic Republic of Congo’s $12 billion Inga 3 hydropower project. According to an interview with Bloomberg, Rajiv Shah, the head of the U.S. Agency for International Development, reportedly said, the U.S. may add the project to a $7 billion U.S. government energy program known as Power Africa.

Along with these types of trans-national investment deals supporting large-scale development opportunities that were previously out of reach, private sector investment is also seeing growth.

This development has often been accompanied by renewable energy support policies.

Future Trends

With interest and investment in hydro picking up, investment in technology research and development has followed suit. Of particular note is the increased investment in tidal and marine kinetic technologies, environmentally benign and fish friendly architecture and pumped storage.

IHA estimates that some 516 MW of tidal and ocean hydropower was installed by the end of 2012, with a pipeline of at least 3 GW in the longer term.  

Variable speed pumped storage turbines have also been a particular focus in light of their role in supporting variable output renewable energy technologies such as wind and solar.

For instance a paper published recently by Stanford University researchers examined the cost effectiveness of energy storage systems, finding that pumped-storage hydropower offers not only one of the highest ratios in terms of “Energy Stored on Invested” of any storage system examined, but also provides a number of ancillary benefits that make it an attractive means of capturing excess energy.

This agreeable operational profile has already seen a number of pumped storage installations being upgraded to variable speed, such as the 485-MW Le Cheylas plant in France, and there remain further opportunities in Europe and elsewhere.

It’s certainly wrong to suggest that hydropower development presents nothing but opportunity, realising its incredible global potential means surmounting some major challenges. Nonetheless, these broad trends suggest that, sustainably developed, hydropower’s innate opportunities for clean energy and water management, grid stability and storage mean that its recent period of significant growth will continue into 2014 and beyond.

This article is part of Renewable Energy World January/February Annual

Advertisements

About kingstonrenewableenergy

Kingston Renewable Energy (KRE), Hydropower products, wind energy, renewable energy products, We manufacture, supply and install. Richard Kingston KRE is the home of Fluxy, a beautiful Irish made wind turbine designed to last several life-times, and a host of other Hydro products branded under KRE hydro. KRE HYDRO- KRE are currently installing a range of Hydro products including high head low flow systems and low head high flow. These are pelton and Turgo types for high head, crossflow Banki turbines for medium to low head and Powerpal for Ultra low head. We also plan to introduce a custom timber/steel/aluminium waterwheel service for those of you who are lucky enough to have disused mills on their land and who would like to restore them to their former glory (and make a healthy profit in the process). All hydro installations are custom designed. This is necessary because everybody's land and water resource is different and to benefit from the highest efficiency and lowest payback time the hydro system must be customized according to what flow, penstock length required, and what head is available. Hydropower is currently by far the most cost effective renewable resource in Ireland under the existing Feed in tariff structure and export rate of 9c per unit (wholesale rate for bigger systems is €0.087/kWh). It is surprising how much energy is to be harvested from even a small stream and we are offering 4 to 7 year payback times on average and high profits thereafter. KRE FLUXY- It has been a long journey from when I originally set out to buy a wind turbine to power my own house in 2007 and discovered that the existing machines on offer in the market failed to meet my desires as a customer; that is, to possess an aesthetically designed machine with a low embodied carbon footprint and a long design lifespan. This led to my resolve to make this a possibility as I knew there were other like minded folks out there who had the same needs when buying into renewable energy. I have always been a keen environmental activist and had a strong understanding of engineering and material sciences which enabled me to see failings in the high tech electronically controlled machines commonly available today. These weaknesses come from over complicating the wind system with servo motors, sensors, gear trains, relays and logic circuits; fine for large utility scale turbines which are constantly monitored and have continual maintenance on site but not for a small wind turbine in the back yard to run the house. I could see that wind turbines needed to be brought back to a less complicated yet modern design that would withstand time and the turbulent and violent winds we see in Ireland and fulfilling the old engineers adage of ‘KISS’ or ‘keep it simple stupid’. With less component parts, there are less things to go wrong. My vision was to create a machine that offered the benefits of being an economic investment, a positive for the environment and also to be a design piece that our customers are proud to have flying in their grounds. And so, I present you with the fully mechanical Kingston Renewable Energy Fluxy wind turbine. Please feel free to contact us at any time if you have any questions or think you may have a good wind site. We will happily do a site assessment come rain or shine. Stay posted for the monthly blogs from our inspirational team here at KRE. Check out our latest installments in our crusade to get higher feed-in tariffs in Ireland so that we can compete with the rest of Europe in the micro-generation stakes. The Hydro section of our website will be updated shortly to show our newest installations and showcase our products. Yours sincerely, Richard Kingston

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s